State guide · Maryland

Maryland well water testing: what to test, which labs, and who can help

Maryland private well testing: UMD Extension's schedule, MDE-certified labs, what county health departments offer (with real fees), and PFAS in wells.

By Tap Tested editorial team · Updated · 5 min read · How we check facts

The short version. In Maryland, a private well is your responsibility: the state does not regulate or test it.[1] University of Maryland Extension recommends an annual test for coliform bacteria, E. coli and nitrate, and a broader panel initially and every three years, all through a laboratory certified by the Maryland Department of the Environment.[2] Your county health department is the local point of contact, and some will collect samples for bacteria and nitrate.[4, 5]

Who is responsible, and who to call

MDE's guidance to private well owners is direct: private wells are not regulated by the state or federal government, and it is the owner's responsibility to test and maintain the well and piping. MDE recommends testing at least once a year.[1] (That fact sheet is dated March 2023, so check MDE for updates.)

The county health department is the local office for wells. Wells must be installed by a licensed well driller, who obtains the well construction permit from the local health department and files a well completion report with it. You can request a copy of your well's completion report from the county health department using the well tag number on the casing.[6] University of Maryland Extension keeps a county-by-county list of well water contacts and phone numbers.[7]

What to test for

University of Maryland Extension's schedule (page last updated April 29, 2021):[2]

How oftenTests
Every yearTotal coliform bacteria, E. coli, nitrate
Initially, then every 3 yearsChloride, copper, hardness, lead, manganese, pH, sulfate, total dissolved solids, and any contaminant of local concern (for example arsenic, radon or radium)

UMD marks coliform bacteria, E. coli, nitrate, copper, lead and manganese as being of particular concern for pregnant women, infants and young children.[2] It also says to test if a pregnant woman or infant lives in the home, if there is unexplained or recurring stomach illness, if neighbors find a dangerous contaminant, if the water suddenly changes in taste, odor, color or clarity, after a chemical or fuel spill near the well, and after the well system is repaired or parts are replaced.[2] Both Howard and Frederick county health departments add testing before choosing or installing a treatment system.[4, 5] For the national version of these recommendations, see our well water testing guide.

Which lab to use

UMD Extension recommends a laboratory certified by MDE to provide water tests.[2] MDE publishes the certified drinking water lab list (latest revision October 1, 2026), which gives each lab's certification number and approved test categories, and marks which labs are approved for PFAS.[3] The list includes many utility and wastewater plant labs, so call first to confirm that a lab accepts samples from private homeowners and ask what it charges, how it wants the sample collected and how quickly you need to deliver it. (That advice is ours.)

What county health departments offer

Services differ by county, so call yours. Two examples:

  • Howard County: the health department can typically collect samples from established wells for bacteria and nitrate, analyzed by the Maryland Department of Health laboratory. There is often a fee for the lab testing, but the county does not charge to collect the sample. For more complex testing, it points you to certified labs.[4]
  • Frederick County: the health department collects samples for coliform bacteria, nitrate and turbidity, with a typical turnaround of two to three weeks. Fees as of September 1, 2025: $50 administration fee per appointment, $41 per coliform sample, $18 per nitrate sample, and $15 per turbidity sample. For PFAS, lead and copper, or faster turnaround, it directs you to private labs, and says private labs may accept drop-off samples, which can lower the cost.[5] Frederick also issues a Certificate of Potability, needed for an occupancy permit on new homes with wells: two bacteria samples at least 24 hours apart that are absent for total coliform and E. coli, one nitrate sample not above 10 mg/L, and one turbidity sample under 10 NTU.[5]

PFAS and private wells

MDE's private-well fact sheet says PFAS may be present in some private wells and links to a list of labs that test for PFAS in drinking water; it says there are a limited number of certified labs capable of testing for it, and that the state generally does not fund or provide testing for private well owners. It suggests asking your local health department about possible testing assistance.[1] Frederick County's health department notes that PFAS has been found in well and surface water in the county.[5]

For wells with PFAS above EPA's limits, MDE recommends treatment on any outlet you drink from, notes that bottled water is an option but can contain PFAS, and suggests asking your public water utility whether you can connect to public water. It names granular activated carbon filters and reverse osmosis as two effective technologies, usually installed at the point of use (a single faucet), and recommends testing after installation. Boiling does not remove PFAS and can concentrate it.[1] MDE recommends a licensed plumber, well driller or water conditioner installer for installation.[1] (The fact sheet was written when EPA's limits were still proposed; EPA finalized limits for PFOA and PFOS at 4.0 ppt in April 2024, and proposed changes in May 2026.[8])

MDE's study of public water systems found PFAS far more often in groundwater from unconfined (shallow) aquifers than in confined aquifers, and more exceedances in the fractured-rock region west of the Fall Line.[9] That study did not test private wells; our reading is that shallow wells in fractured-rock areas are the ones most worth testing for PFAS. See our Maryland PFAS by utility guide for the details.

Lead and other well-specific problems

Lead in a well's water can come from corrosive groundwater dissolving lead from plumbing, and CDC says testing at a certified laboratory is the way to confirm it; see our lead testing guide.[10] If you are considering a treatment system, both Howard and Frederick county health departments advise testing before you select and install one.[4, 5]

How we built this page: see methodology and sources. Spot an error? The about page has our contact address.

Frequently asked questions

Who tests private wells in Maryland?
Nobody does it for you automatically. MDE says private wells are not regulated and the owner is responsible for testing and maintenance (MDE). Some county health departments will collect samples for bacteria and nitrate, and MDE-certified private labs handle the rest.
How often should I test my well in Maryland?
University of Maryland Extension recommends testing annually for total coliform bacteria, E. coli and nitrate, and testing initially or every three years for chloride, copper, hardness, lead, manganese, pH, sulfate, total dissolved solids and any local contaminants of concern (UMD Extension). MDE says test at least once a year.
How much does well testing cost in Maryland?
There is no statewide price list that we could find. One example: Frederick County Health Department charges a $50 administration fee per appointment plus $41 per coliform sample, $18 per nitrate sample and $15 per turbidity sample, as of September 1, 2025 (Frederick County). Private labs set their own prices; ask for a price list.
Can I test my Maryland well for PFAS?
Yes, through a laboratory that is certified for it. MDE says only a limited number of certified labs can test drinking water for PFAS, and its certified-lab list shows each lab's approved test categories (MDE factsheet, MDE lab list). The Frederick County Health Department says it does not take PFAS samples (Frederick County).

Sources

Every factual claim above links to one of these. Accessed November 18, 2026 unless noted.

  1. PFAS in Private Drinking Water Wells (factsheet, March 2023) — Maryland Department of the Environment. Written before EPA finalized its 2024 PFAS rule; it refers to the then-proposed limits.
  2. Water Testing — University of Maryland Extension.
  3. Maryland's Certified Drinking Water Laboratories (list revised 10/1/2026) — Maryland Department of the Environment.
  4. Well Water Testing — Howard County (MD) Health Department.
  5. Well Water Testing — Frederick County (MD) Health Department.
  6. Information About Your Well — Maryland Geological Survey (Maryland DNR).
  7. County Government Resources (wells, septic systems and water quality) — University of Maryland Extension.
  8. Per- and Polyfluoroalkyl Substances (PFAS): Final PFAS National Primary Drinking Water Regulation — U.S. EPA. Page last updated May 18, 2026; describes the 2024 rule and the May 2026 proposals.
  9. Summary Report for MDE's PFAS in Public Drinking Water Study (April 2026) — Maryland Department of the Environment.
  10. Groundwater Corrosivity and Lead in Wells — Centers for Disease Control and Prevention.

Affiliate disclosure: some links to products or services on this site may be affiliate links. See our disclosure. Recommendations follow independent certification, not commissions.