Guide · Lead

How to test your tap water for lead (and what the results mean)

How to run a lead water test: ask your utility, use a certified lab, take a first-draw sample, and what 15 ppb really means. Why most home kits fall short.

By Tap Tested editorial team · Updated · 5 min read · How we check facts

The short version. You can't see, taste or smell lead in water, so testing is the only sure way to know.[2] Ask your water utility first; many will test on request.[5] If not, send a first-draw sample to a laboratory certified by your state. EPA says that costs between $20 and $100.[2] Skip most home lead kits: in the one study of the market we found, most were unsuitable for drinking water.[4]

Why test your own tap

Your utility's lead results are a system-wide picture; they don't reflect conditions at your specific faucet.[6] Lead pipes (lead service lines) are the leading source of lead in drinking water, and faucets and fixtures are other common sources.[1] CDC adds that homes without lead service lines can still have brass or chrome-plated brass faucets, galvanized iron pipes, or lead solder, and that plumbing fixtures and solder made before 1986 may contain lead.[5] Lead can enter water when plumbing materials corrode, especially where the water is acidic or low in minerals.[1]

EPA and CDC agree there is no known safe level of lead in a child's blood, and that children are particularly vulnerable.[1] CDC notes that infants who drink formula made with contaminated tap water may be at higher risk, and that bathing and showering should be safe because skin does not absorb lead in water.[5]

Step 1: Ask your water utility

CDC says your local water authority is always your first source for testing and identifying lead in tap water. Ask whether a lead service line serves your home, and whether there are removal assistance programs.[5] EPA's step-by-step guide, Protect Your Tap: A Quick Check for Lead, helps you check the pipes into your home yourself.[7] Your utility's annual water quality report also has lead information.[1]

Step 2: Use a certified lab if the utility won't test

Lists of certified laboratories are available from your state or local drinking water authority.[2] EPA's laboratory certification page links to every state's program and notes that EPA itself cannot test residential water on request.[8] EPA says lead testing costs between $20 and $100.[2]

Step 3: Collect the sample the right way

Lead builds up in water as it sits in pipes, so labs usually want a first-draw sample. As one university lab describes it: collect water that has sat in the pipes at least six hours, first thing in the morning, from the faucet where you get most of your drinking water, before any water has been run. Don't run the water first.[3] Some labs also ask for a second, flushed sample, so ask which they want. CDC points out that water sampling results can vary with time of day, season, sampling method and flow, and that particulate lead is easy to miss with standard sampling; particles trapped in faucet aerators have tested positive for lead.[5, 9] That is why you should follow your lab's protocol exactly instead of improvising.

What about home lead test kits?

At-home lead kits are a weak spot. A study of 16 kit brands found that most (12 of 16) were not suitable for drinking water analysis, with lead detection limits of 5 to 20 mg/L, far above drinking-water levels. Binary strips could detect dissolved lead at relevant levels but failed to detect particulate lead.[4] San Francisco's utility says lead kits can give variable results depending on the brand, and that a poor result should be confirmed by a laboratory.[10] More in Water test kits vs. a certified lab.

What your lead result means

  • Zero is the health goal. EPA's maximum contaminant level goal for lead is zero because the best available science shows no safe level of exposure.[1]
  • 15 ppb is an action level, not a safe level. If more than 10 percent of a utility's tap samples exceed 15 parts per billion (0.015 mg/L), the utility must take additional actions.[1, 11] It is a trigger for the water system, judged across many homes, not a line your own tap has to cross to matter. (For how this looks in a real report, see the lead row in our Fairfax, Loudoun and Arlington comparison.)
  • The action level is dropping. EPA's 2024 Lead and Copper Rule Improvements lower the action level to 10 µg/L. EPA's page says water systems must begin complying three years after the final rule's publication (compliance is expected to begin in late 2027) and continue under the existing rule until then.[11]

If your test finds lead

EPA recommends contacting your water system and health department and says you can take these steps separately or together:[2, 11]

  1. Use cold water for drinking, cooking and making baby formula. Hot tap water can contain higher lead, and boiling does not remove lead.[2]
  2. Run your tap before drinking if water has been sitting; ask your utility how long to run it, which depends on whether you have a lead service line.[11] CDC suggests flushing 1 to 2 minutes before first use.[9]
  3. Clean your faucet aerators regularly; sediment, debris and lead particles can collect in them.[11]
  4. Use a filter certified to remove lead, follow the directions, replace the cartridge on schedule, and don't run hot water through it.[11] CDC says look for NSF/ANSI Standard 53 for lead removal and NSF/ANSI Standard 42 for particulate removal.[5]
  5. Find out whether you have a lead service line (ask your utility or a licensed plumber, or use Protect Your Tap) and ask about replacement programs.[11, 7]
  6. Talk to your child's doctor. A blood lead test is the best way to tell whether someone has been exposed; a health care provider decides whether one is needed.[5]

Private wells

Lead can leach into private well water, particularly where groundwater is corrosive, and the Safe Drinking Water Act does not require monitoring of private wells. CDC says to test the sample at a certified laboratory, which is the only way to confirm that lead has leached into the water.[9] For the full well checklist, see Well water testing.

How we built this page: see methodology and sources. Spot an error? The about page has our contact address.

Frequently asked questions

How do I test my tap water for lead?
Start by asking your water utility; many will test on request (CDC). Otherwise use a laboratory certified by your state, which you can find through your state or local drinking water authority (EPA). EPA says testing costs between $20 and $100.
What is a first-draw lead sample?
Water that has sat in the pipes for at least six hours, collected first thing in the morning from the faucet you drink from, before any water has been run (Penn State). Always follow your lab's own instructions.
What lead level is safe in drinking water?
EPA's health goal is zero because there is no safe level of exposure to lead (EPA). The 15 parts per billion 'action level' is a trigger for utilities to take action when more than 10 percent of tap samples exceed it, not a safe-level line for your tap.
Do home lead test kits work?
Mostly not: in a study of 16 brands, 12 had detection limits of 5 to 20 mg/L, far too high for drinking water, and simple strips missed particulate lead (Kriss et al., 2021). Use a utility test or certified lab.
My well water, does it need a lead test too?
Yes. CDC says lead can leach into private well water, the Safe Drinking Water Act does not require monitoring of private wells, and testing at a certified laboratory is the only way to confirm lead (CDC).

Sources

Every factual claim above links to one of these. Accessed November 18, 2026 unless noted.

  1. Lead in Drinking Water — U.S. EPA.
  2. Basic Information about Lead in Drinking Water — U.S. EPA.
  3. How to Collect a Water Sample (Agricultural Analytical Services Lab) — Penn State College of Agricultural Sciences.
  4. Challenges of Detecting Lead in Drinking Water Using At-Home Test Kits (Kriss et al., Environ. Sci. Technol. 55(3), 2021) — abstract record — U.S. EPA HERO database.
  5. About Lead in Drinking Water — Centers for Disease Control and Prevention.
  6. Home Water Testing (fact sheet EPA 816-F-05-013, May 2005) — U.S. EPA.
  7. Protect Your Tap: A Quick Check for Lead — U.S. EPA.
  8. Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA.
  9. Groundwater Corrosivity and Lead in Wells — Centers for Disease Control and Prevention.
  10. Home Test Kits — San Francisco Public Utilities Commission.
  11. Lead and Copper Rule Improvements (LCRI): Questions and Answers — U.S. EPA.

Affiliate disclosure: some links to products or services on this site may be affiliate links. See our disclosure. Recommendations follow independent certification, not commissions.