State guide · District of Columbia
DC tap water: lead service lines, PFAS results, and how to test
What DC Water's 2025 report says about lead and PFAS, how to get a free lead test, how lead pipe replacement works, and who oversees DC drinking water.
The short version. DC's tap water is treated by the U.S. Army Corps of Engineers' Washington Aqueduct and delivered by DC Water, with EPA Region 3 as the regulator.[1, 2] DC Water's 2025 report says the water met every EPA standard,[1] and its PFAS results are below EPA's limits.[5] The real variable at your tap is lead: it comes mainly from service lines and home plumbing, and DC Water will test your water for free once a year.[1, 4]
Where DC's water comes from, and who is responsible
DC Water's water comes from the Potomac River. The Washington Aqueduct withdraws about 140 million gallons a day from intakes at Great Falls and Little Falls, and filters and treats it at the Dalecarlia and McMillan plants.[1] DC Water buys the treated water and distributes it; it does not treat it further.[2]
Responsibility for lead is shared. DC Water's own FAQ lists: DC Water (distribution system, public-side service lines, lead testing, outreach), the Aqueduct (treatment, including corrosion control), property owners (the private side of the service line and the plumbing inside the building), DOEE (enforcing District lead laws and running the replacement assistance program), the District Department of Health (childhood lead poisoning prevention) and EPA Region 3 (regulatory oversight).[6]
Lead: service lines and what the tap results show
How lead gets in. Water leaves the treatment plant essentially lead-free; it picks up lead from service lines and plumbing.[3] DC Water lists lead service pipes (commonly installed in the District until the mid-1950s), lead solder in homes built before 1987, brass faucets and fittings, and galvanized iron pipes that have accumulated lead from an upstream lead pipe.[6] Its 2025 report adds that some lead service lines were installed as late as 1977.[1] DC Water estimates the District has more than 42,000 service lines with lead or galvanized-iron pipe, and aims to replace all of them.[3]
What DC Water's 2025 tap sampling found. DC Water's report lists lead at customers' taps for two six-month periods:[1]
| Monitoring period (2025) | 90th percentile | Samples above the 15 ppb action level | Range |
|---|---|---|---|
| January to June | 1 ppb | 2 of 105 | ND to 243 ppb |
| July to December | 2 ppb | 2 of 106 | ND to 123 ppb |
How to read it: the "90th percentile" is the level that 90% of sampled taps were at or below, so most sampled homes had very little lead in their water. The range shows why testing your own tap matters: a few individual homes had far higher results.[1] The 15 ppb "action level" is a trigger for the utility, not a safe level for your tap; EPA's health goal for lead is zero.[7] See our general lead testing guide for how to read and sample.
Find your own service line. DC Water publishes a service line map showing what it knows about the pipe at each address, and notes that some entries rely on historical records that may not be accurate.[1, 3] Its report also explains how to identify pipe material yourself (lead is dull gray and bendable, galvanized iron is magnetic, copper is brown).[1]
Replacing a lead service line
DC Water's programs, as described on its website:[8, 6]
- Public side: DC Water always replaces the public portion of a lead service line at no cost to the owner.[6]
- During construction projects: when DC Water replaces lines during water main and Block-by-Block projects, replacement on private property is free for properties whose owner signs a Right of Entry agreement.[8]
- Private side only (LPRAP): if the private side is lead, galvanized or brass and the public side is not, the Lead Pipe Replacement Assistance Program uses District and DC Water funds, when available, to provide a free or discounted replacement. DOEE and DC Water manage it jointly.[8, 9]
- Priority full replacement: for lead or galvanized pipe on both sides, households with a qualifying need (a pregnant or nursing mother, a child under 6, a person with an elevated blood lead level, elevated water lead levels, or a licensed child development facility) or a leaking or broken line can get a free replacement, subject to available funding.[8]
- Voluntary full replacement: if both sides are lead and no project is planned, DC Water pays for the public side and the owner pays for the private side.[8]
DOEE says there is a new joint application form as of October 2026, and you will need photo ID and proof of ownership.[9] DC Water adds that, after a replacement, it provides a filter pitcher with a six-month filter, a flushing schedule and a free lead test kit four to six months later.[6] District law also requires landlords to disclose known lead pipes and lead test results to tenants, and requires homeowners to do the same for buyers.[8]
How to test your DC tap water
Free lead test from DC Water. DC Water offers one free lead test per year to residential and commercial customers. The kit has two sample bottles, instructions and a plumbing questionnaire; you collect the samples. Results come about four to six weeks after the lab receives them, with a letter, and are posted to your account.[4] Request one at [email protected] or (202) 612-3440.[4] DC Water stresses that a result is a snapshot of the moment of collection, and that the test does not confirm the absence of a lead pipe.[6] If a home has elevated results, DC Water can do a household lead profile, with a plumbing survey and a dozen or more samples taken in different parts of the plumbing.[4]
Independent labs. DC Water also points to certified labs in the Washington area that test for a fee, and refers customers to EPA's laboratory certification page.[4, 10] If you want a test for PFAS or other contaminants, use a certified laboratory and ask which methods it uses. We do not recommend specific labs.
Public schools. The District Department of General Services provides lead monitoring results for District public schools.[4]
PFAS in DC water
The Washington Aqueduct began voluntary PFAS monitoring in 2023 using methods with a reporting limit of 2.0 ppt.[5] DC Water's 2025 report summarizes the year across both plants:[1]
| PFAS (2025 voluntary monitoring) | Average | Range | EPA limit (MCL) |
|---|---|---|---|
| PFOA | 0.5 ppt | ND to 2.4 ppt | 4.0 ppt |
| PFOS | 1.1 ppt | ND to 3.1 ppt | 4.0 ppt |
| PFHxS | 0.0 ppt | ND | 10 ppt |
| PFNA | 0.0 ppt | ND | 10 ppt |
| GenX (HFPO-DA) | 0.0 ppt | ND | 10 ppt |
| PFBS | 1.1 ppt | ND to 2.7 ppt | counted in the Hazard Index |
| Hazard Index (mixtures) | 0.0 | ND | 1 (unitless) |
| PFBA, PFPeA, PFHxA (no EPA limit) | 1.8, 2.7, 2.0 ppt | up to 5.7, 4.7, 3.4 ppt | none |
ND means not detected (below the 2.0 ppt reporting limit). Figures are from DC Water's report; we did not recalculate them. Separately, EPA's UCMR 5 program sampled the Dalecarlia and McMillan connections on July 22, 2024, and found PFPeA (4.4 and 4.7 ppt) and PFHxA (3.1 ppt at McMillan).[11] DC Water reports the two programs separately because the UCMR 5 reporting limits were higher than its voluntary monitoring.[5]
What the rules say now. EPA finalized limits for six PFAS in April 2024, with initial monitoring due by 2027 and any needed reductions by 2029. In May 2026 EPA proposed to keep the PFOA and PFOS limits, with an option to request two more years, and to withdraw the limits for PFHxS, PFNA, GenX and the Hazard Index. Those are proposals, not final rules.[12] DC Water says it follows EPA Region 3's guidance and that its results over the past two years are below the limits and the Hazard Index. It also says customer action is not required.[5] For general steps to reduce PFAS exposure and how home filters are certified, see EPA's guidance on home filters.[13]
Compliance record
EPA Region 3's 2025 compliance report for the District lists 13 violations across 3 of the District's 5 regulated public water systems. Per its Appendix A, all three are federal installations (Joint Base Anacostia-Bolling, Naval Station Washington and the Naval Observatory); neither DC Water nor the Aqueduct appears in that list.[2] If you live or work on one of those installations, check that system's own notices.
Private wells in DC
Most well construction in DC needs a DOEE permit.[14] If you have a private well, see the DC hub and our national well water testing guide.
How we built this page: see methodology and sources. Spot an error? The about page has our contact address.
Frequently asked questions
Is DC tap water safe to drink?
How do I get a free lead test in DC?
Does a clean lead test mean I have no lead pipe?
Who pays to replace a lead service line in DC?
Are there PFAS in DC drinking water?
Sources
Every factual claim above links to one of these. Accessed November 18, 2026 unless noted.
- 2026 Drinking Water Quality Report (calendar-year 2025 data) — DC Water.
- 2025 Annual Drinking Water Compliance Report for the District of Columbia — U.S. EPA Region 3.
- Lead Free DC — DC Water.
- Customers Can Get a Free Lead Test — DC Water.
- PFAS and Drinking Water (Washington Aqueduct Dalecarlia/McMillan results) — DC Water.
- Lead FAQs — DC Water.
- Lead in Drinking Water — U.S. EPA.
- Lead Pipe Replacement Programs — DC Water.
- Lead Pipe Replacement Assistance Program — DC Department of Energy and Environment (DOEE).
- Contact Information for Certification Programs and Certified Laboratories for Drinking Water — U.S. EPA.
- Unregulated Contaminant Monitoring Rule (UCMR) — DC Water.
- Per- and Polyfluoroalkyl Substances (PFAS): Final PFAS National Primary Drinking Water Regulation — U.S. EPA. Page last updated May 18, 2026; describes the 2024 rule and the May 2026 proposals.
- Reducing PFAS in Your Drinking Water with a Home Filter — U.S. EPA. Re-read 2026-11-19.
- Well and Boring Permits — DC Department of Energy and Environment (DOEE).
Affiliate disclosure: some links to products or services on this site may be affiliate links. See our disclosure. Recommendations follow independent certification, not commissions.