Utility guide · Fairfax Water

Fairfax Water PFAS results, explained for Springfield and Fairfax County homes

Fairfax Water's own 2025–2026 PFOA and PFOS data compared with EPA's 4 ppt limit, and what the 2026 rule changes mean for your tap.

By Tap Tested editorial team · Updated · 10 min read · How we check facts

The short version. Fairfax Water tests its finished water for PFAS about monthly at three entry points. At the two Potomac River entry points, PFOA and PFOS were not detected in any sample from January 2025 through September 2026.[4] At the Occoquan Reservoir entry point (the Griffith plant), PFOA or PFOS showed up in most samples, at levels between 4.1 and 6.8 ppt, around EPA's new limit of 4.0 ppt.[4, 5] That limit is not enforceable until 2029, and Fairfax Water says it is working on treatment to meet it.[1] Which water comes out of your tap depends on which plant serves your address, so that is the first thing to find out.

Which Fairfax Water do you get?

Fairfax Water treats two source waters at four plants: the Potomac River at the Corbalis plant (and, for some customers, at the Washington Aqueduct's Dalecarlia and McMillan plants), and the Occoquan Reservoir at the Griffith plant in Lorton.[3] Fairfax Water's service-area map shows most of the county, including the Springfield area, in the zone that "typically" receives water from the Corbalis or Griffith plants. A smaller area around McLean and Falls Church gets Washington Aqueduct water instead.[3]

The report does not say whether a given street gets Corbalis (Potomac) water, Griffith (Occoquan) water, or a mix, and it warns that service-area borders change as operations require.[3] So we can't tell you your plant from your ZIP code.

Fairfax Water's own analytical-reports page says homes in the north end of the county generally receive water from the Corbalis plant and more southern locations from the Griffith plant.[6] We did not find an address-level lookup on Fairfax Water's site, so that rule of thumb is as precise as we can be without your address.

What to do: call Fairfax Water at 703-698-5800 (listed in its water quality report) and ask which treatment plant or plants serve your address.[3]

What Fairfax Water's PFAS data shows

Fairfax Water has monitored PFAS in its water since 2021 and publishes the results.[1] The newest file, updated October 2026, lists monthly results for three entry points where treated water leaves a plant: Corbalis (labeled "Potomac 1," EP001), the Washington Aqueduct supply (labeled "Potomac 2," EP401), and Griffith (labeled "Occoquan," EP022).[4] We read the PDF and totaled the PFOA and PFOS columns (the two PFAS with EPA limits that matter most here). Our totals for 2025 match the 2025 averages Fairfax Water printed in its own annual report.[3]

Entry pointSamples Jan 2025–Sep 2026PFOA detected (≥ 4 ppt)PFOS detected (≥ 4 ppt)Highest PFOA / PFOS
Corbalis plant (Potomac 1)
EP001
220 of 220 of 22ND / ND ppt
Washington Aqueduct (Potomac 2)
EP401
220 of 220 of 22ND / ND ppt
Griffith plant (Occoquan)
EP022
2115 of 218 of 216.8 / 5.0 ppt

The Potomac supplies. No PFOA or PFOS was found at either Potomac entry point in any sample in that period.[4] Fairfax Water's page says the same in words: Potomac-source finished water "consistently shows PFAS levels below the EPA's new MCL of 4.0 ppt, often at non-detectable levels."[1]

The Occoquan supply. Fairfax Water says "some samples have slightly exceeded the MCL for PFOA and PFOS, but all other regulated PFAS are within acceptable limits."[1] The month-by-month results below show how often.

Sample datePFOA (ppt)PFOS (ppt)
Sep 8, 2026ND4.6
Aug 11, 20264.75
Jul 14, 20264.74.2
Jun 9, 20264.74.1
May 12, 20266.7ND
Apr 14, 20265.14.8
Mar 10, 20264.9ND
Feb 10, 20265.8ND
Jan 13, 20266.8ND
Dec 9, 20255.5ND
Nov 12, 20256.74.2
Oct 14, 20256.15
Sep 9, 2025NDND
Aug 12, 2025NDND
Jul 8, 20254.44.2
Jun 10, 20254.1ND
May 13, 20254.1ND
Apr 8, 2025NDND
Mar 11, 2025NDND
Feb 20, 2025NDND
Jan 29, 20255.3ND

ND = not detected (below Fairfax Water’s 4 ppt reporting limit). Shaded cells are detections; every detection is at or above 4.1 ppt because the reporting limit is 4 ppt. Source: Fairfax Water PFAS testing data, EPA Method 533.

What the averages say

EPA's limits are written as running annual averages at each sampling point, not single results.[5] Fairfax Water's own annual report averages all of 2025's samples and counts non-detects as zero.[3] We did the same arithmetic, and also averaged the latest 12 samples:

Entry pointPollutant2025 average
(Fairfax’s method: ND = 0)
2026 average so far
(Jan–Sep)
Latest 12 samples
(Oct 2025–Sep 2026)
EPA limit
Corbalis plant (Potomac 1)
EP001
PFOAND (0)ND (0)ND (0)4.0 ppt
PFOSND (0)ND (0)ND (0)4.0 ppt
Washington Aqueduct (Potomac 2)
EP401
PFOAND (0)ND (0)ND (0)4.0 ppt
PFOSND (0)ND (0)ND (0)4.0 ppt
Griffith plant (Occoquan)
EP022
PFOA3.02 ppt4.82 ppt5.14 ppt4.0 ppt
PFOS1.12 ppt2.52 ppt2.66 ppt4.0 ppt

Two ways to read that table:

  • For all of calendar year 2025, the Griffith averages (PFOA 3.02 ppt, PFOS 1.12 ppt) were under 4.0 ppt, as printed in Fairfax Water's annual report.[3]
  • Over the latest 12 samples (October 2025 to September 2026), our simple average at the Occoquan entry point is 5.14 ppt for PFOA and 2.66 ppt for PFOS. PFOA is above 4.0 ppt on that math, and PFOS is below.

Caveats you should know. This is our arithmetic on Fairfax Water's published numbers, not a regulatory finding. Counting non-detects as zero is the convention Fairfax Water and EPA use, but it can pull averages down, because a non-detect only means "under 4 ppt."[3, 4] The limits are not yet enforceable, and EPA says compliance will be judged on running annual averages of quarterly compliance results at each sampling point, reported to the state.[7] Fairfax Water's own wording is that some samples "slightly exceeded" the limit.[1]

Other PFAS were also found at low levels. For example, the 2025 annual report lists PFBS, PFBA, PFHpA, PFHxA, and PFPeA in Griffith water and a few others in the Potomac supplies. Among those, only PFBS counts toward a regulated "hazard index," which EPA has proposed to withdraw (see below).[3, 5] One PFHxS result of 3.8 ppt appeared in May 2026 at the Occoquan entry point; the (proposed-for-rescission) PFHxS limit is 10 ppt.[4, 5]

What the rules say right now

  • April 10, 2024: EPA finalized limits (MCLs) for six PFAS, including 4.0 ppt each for PFOA and PFOS. EPA's health-based goal (MCLG) for both is zero. Utilities must finish initial monitoring by 2027 and, if levels exceed the limits, have until 2029 to reduce them.[5]
  • May 18, 2026: EPA announced two proposed rules. One would keep the PFOA and PFOS limits and let systems request two more years, to 2031. The other would withdraw the limits for PFHxS, PFNA, HFPO-DA (GenX), and the mixture "hazard index."[5] Virginia's health department summarizes the same proposals.[8] These are proposals, not final rules.
  • Fairfax Water's position: it says it is committed to meeting the standards by 2029.[1] Its page and report were written before the proposed 2031 option, so check them for updates.

EPA also ran a national testing program, the fifth Unregulated Contaminant Monitoring Rule (UCMR 5), with sampling from 2023 to 2025 and a final dataset released in August 2026. EPA stresses that those results do not show compliance or non-compliance with the limits, and you can look up any utility in its Data Finder.[7, 9]

What Fairfax Water says it is doing

At Griffith, Fairfax Water says it is testing treatment options and installing a powdered activated carbon system. It also funds source-water studies, is suing PFAS manufacturers, and supports legislation and research.[1] It notes that treatment captures PFAS on filters but does not destroy them, and that treatment could affect rates in the future, though it expects rates to stay among the region's lowest, about a penny per gallon.[1]

What this means for your household

We can't tell you what level is right for your family, and we won't tell you to be alarmed. A few grounded facts:

  • Fairfax Water estimates drinking water is about 20% of total PFAS exposure for most people. The rest comes from food, consumer products, and other sources.[1]
  • Fairfax Water's FAQ says long-term exposure to some PFAS may carry health risks, including liver effects, higher cholesterol, weakened immunity, and certain cancers.[1] EPA sets its health goal for PFOA and PFOS at zero, which is why the enforceable limits are as low as current testing can reliably measure.[5]
  • If you are pregnant, feeding an infant formula mixed with tap water, or have a medical condition, ask your clinician what they recommend. Boiling won't help; NSF says boiling water that contains PFAS will not reduce exposure risk.[10]

If you decide to filter: how to choose

Certification, not marketing, is the test. EPA's advice is to check the packaging for NSF/ANSI 53 or NSF/ANSI 58 certification for PFAS reduction, then confirm the specific model in the certifier's own directory.[11] Five ANSI-accredited certifiers evaluate PFAS claims: CSA Group, IAPMO R&T, NSF, UL, and WQA.[11]

Three honest limits:

  1. Certified is not the same as "down to 4 ppt." NSF says a PFAS reduction claim requires reducing PFAS to below 20 ppt.[10] EPA says current certification standards (as of April 2024) do not yet indicate that a filter reaches the new regulatory levels, and that it is working with standard-setters to update them.[11]
  2. Maintenance matters. Filters only work if replaced on the manufacturer's schedule.[11]
  3. Check the exact model. A brand can have certified and uncertified products.

What NSF's own listings show today. We queried NSF's public listing database on November 18, 2026. Under NSF/ANSI 53, the "PFOA Reduction" claim returned 57 products from 7 manufacturers: 4Patriots, Amway (two entities), Omnipure, Samsung, Tupperware Brands, and Whirlpool.[12] The "PFOS Reduction" search returned the same count.[13] Examples of listed models include Omnipure's plumbed-in ELF 1MPF and Q5515 PF filters, Whirlpool refrigerator filters EDR3RXD1B and EDR3RXD1R, and Amway's eSpring countertop units.[12] The NSF/ANSI 58 (reverse osmosis) search for "PFOA Reduction" returned no matching products.[14] That does not mean no RO system is certified, because other certifiers also list products and claims can be worded differently. It does mean you should verify any RO system's PFOA/PFOS claim yourself in the certifier's directory.[11, 15]

We are not endorsing those products; we are showing you how to verify. Use NSF's directory to confirm a model before you buy.[15]

What the filter certifiers' directories show. Several certifiers other than NSF list products for PFOA and PFOS. On November 18, 2026 we read the Water Quality Association (WQA) Gold Seal directory directly. It lists, under NSF/ANSI 53, PFOA and PFOS reduction claims for these specific models:

  • Aquasana under-sink and countertop models including AQ-4000, AQ-5300, AQ-5300+, AQ-6200, AQ-6300, AQ-6300M and the Clean Water Machine (AQ-CWM2), plus the SmartFlow reverse-osmosis models AQ-SFRO and AQ-SFRO2.[16] Not every Aquasana row in that listing carries a PFOA/PFOS claim, so match your exact model number before you rely on it.[16]
  • ZeroWater faucet-mount models ZFM-400CR and ZFM-400WH.[17]
  • Culligan faucet-mount models CFM-300CR, CFM-300WH, CULFMCH and CULFMWH.[18]
  • Kinetico K5 Drinking Water Station, listed for PFOA and PFOS under NSF/ANSI 58 (reverse osmosis).[19]

A certification covers an exact model and its replacement cartridge, not the brand. EPA also notes that current filter certifications have not yet been shown to reduce PFAS to its 4 ppt limits, so a certified filter is a way to lower PFOA and PFOS, not a guarantee of zero.[11] Some other certifiers (such as IAPMO R&T) also list PFAS-certified products; check the listing for any model you are considering.

Your next steps, in order

  1. Call Fairfax Water (703-698-5800) and ask which plant serves your address.[3]
  2. Read the 2025 data in Fairfax Water's annual water quality report (PFAS summary on page 12), and the PFAS data file for current months.[3, 4]
  3. Decide whether a filter makes sense for you. If so, verify the model's PFOA/PFOS certification in the certifier's directory.[11]
  4. Check back: EPA's proposals could change timelines, and Fairfax Water updates its data periodically.[5, 1]

How we built this page: see methodology and sources. Spot an error? Email us at the address on our About page and we will fix and date the correction.

Frequently asked questions

Is Fairfax Water safe to drink?
Fairfax Water says its water meets or surpasses all state and federal regulations (2026 Water Quality Report). EPA's new 4 ppt limits for PFOA and PFOS are not yet enforceable; EPA's rule gives utilities until 2029 to comply (EPA). Fairfax Water says some Occoquan samples have slightly exceeded those limits and that it is evaluating treatment (Fairfax Water).
Which Fairfax Water plant serves Springfield?
Fairfax Water's service-area map places Springfield in the area served by its own Corbalis or Griffith plants rather than the Washington Aqueduct area, but the report does not say which of the two, and it notes that borders change with operations (2026 Water Quality Report). Call Fairfax Water at 703-698-5800 to ask about your address.
What does ND mean on Fairfax Water's PFAS table?
ND means non-detect: the result was below the lab's reporting limit, which is 4 ppt for PFOA and PFOS in Fairfax Water's table (Fairfax Water PFAS data). It does not mean exactly zero.
Will boiling my water remove PFAS?
No. NSF says boiling water that contains PFAS will not reduce exposure risk (NSF).
Do I need a PFAS filter?
That is your decision. If you choose one, EPA advises choosing a filter certified to NSF/ANSI 53 or 58 for PFAS reduction and maintaining it on the manufacturer's schedule, and notes that current certifications do not yet show removal down to the 4 ppt level (EPA).

Sources

Every factual claim above links to one of these. Accessed November 18, 2026 unless noted.

  1. Facts About PFAS — Fairfax Water.
  2. Water Quality — Fairfax Water.
  3. 2026 Annual Water Quality Report (calendar-year 2025 data) — Fairfax Water.
  4. Fairfax Water PFAS Testing Data (2013–2026), PDF updated Oct 2026 — Fairfax Water. Linked as “click here (Updated October 9, 2026)” on the Facts About PFAS page.
  5. Per- and Polyfluoroalkyl Substances (PFAS): Final PFAS National Primary Drinking Water Regulation — U.S. EPA. Page last updated May 18, 2026; describes the 2024 rule and the May 2026 proposals.
  6. Water Quality Analytical Reports - Fairfax Water Service Area — Fairfax Water.
  7. Fifth Unregulated Contaminant Monitoring Rule (UCMR 5) — U.S. EPA.
  8. Per- and Polyfluoroalkyl Substances (PFAS) in Drinking Water — Virginia Department of Health, Office of Drinking Water.
  9. UCMR 5 Data Finder — U.S. EPA.
  10. PFAS in Drinking Water — NSF.
  11. Reducing PFAS in Your Drinking Water with a Home Filter — U.S. EPA.
  12. NSF Product and Service Listings — NSF/ANSI 53, claim “PFOA Reduction” (queried Nov 18, 2026) — NSF International.
  13. NSF Product and Service Listings — NSF/ANSI 53, claim “PFOS Reduction” (queried Nov 18, 2026) — NSF International.
  14. NSF Product and Service Listings — NSF/ANSI 58, claim “PFOA Reduction” (queried Nov 18, 2026: no matching products) — NSF International.
  15. NSF Certified Drinking Water Treatment Units directory — NSF International.
  16. WQA Gold Seal directory: Aquasana, Inc. (NSF/ANSI 53) — Water Quality Association.
  17. WQA Gold Seal directory: Zero Technologies, LLC (NSF/ANSI 53) — Water Quality Association.
  18. WQA Gold Seal directory: Culligan International (NSF/ANSI 53) — Water Quality Association.
  19. WQA Gold Seal directory: Kinetico Incorporated (NSF/ANSI 58) — Water Quality Association.

Affiliate disclosure: some links to products or services on this site may be affiliate links. See our disclosure. Recommendations follow independent certification, not commissions.